Transfer Adhesive — precision meets artistry

Turn prints, drawings, and digital art into part of the piece—clean, crisp, ceramic-ready. Eco Forma™ Transfer Adhesive — Matte is a water-borne, low-haze, tack-stage adhesive tuned for Eco Forma Artisan Air-Dry Clay. It moves full-color images, linework, and text cleanly, leaving a thin, smooth bond while preserving the clay’s porcelain-matte read.

Why makers love it

• Formulated for Eco Forma clay — clear release on light and dark motifs; no plastic sheen
• Tack-stage control — a forgiving 2–5 min window that makes wraps and small forms easier
• Water-borne, very low VOC — studio-safe for home, class, and shop
• System-ready — seal with Matte Dip (quick, protective), then finish with Dome Coat (Gloss or Velvet Matte)

How to use (quick flow)

1. Print coated side of Pre-Coated Transfer Film (driver: Matte/Fine-Art, quality: High). Heavy ink or humid room? Warm-dry 50–60 °C × 5–7 min, cool flat.
2. Brush a thin, even coat of Transfer Adhesive on clay → wait 2–5 min until tacky (sheen down).
3. Lay print face-down; smooth fingertips only from center (no burnish). Dwell 20–30 min.

4. Peel low & slow (~180°) → rest 20–30 min.
5. Seal & finish: Matte Dip (quick, protective seal) → Dome Coat (Gloss for clarity/height; Velvet Matte for soft, photo-friendly sheen).
   Layered effects: transfer → seal → color/paint → repeat.

Best for

Text, illustration, photography, monograms, and pattern work across jewelry, tiles, ornaments, and small décor.

Sizes

2 oz • 4 oz • 8 oz • 16 oz studio bottles

Pairs with

Pre-Coated Transfer Film — Letter (10 / 25); optional Transfer Coat (DIY film); Matte Dip; Dome Coat — Gloss / Velvet Matte.

Care

Store sealed at 15–25 °C. Stir, don’t shake; strain 150–200 mesh if needed. Water-borne cleanup; decorative use only.