Studio Notes | Eco Forma™ Air-Cure Ceramic Workflow

Choosing Between Gloss Top Coat and Ceramic Coat

Eco Forma top coats are not epoxy resin and not ordinary top coats. They are waterborne finishes designed to level cleanly, build in controlled coats, and cure to a more refined surface without two...

Why Artists and Designers Are Moving to Air-Cure Ceramic

Eco Forma is more than another clay. It is a studio material for serious makers, built for performance, control, and a more considered studio practice.

Polymer Clay vs. Air-Cure Ceramic

Polymer clay is a synthetic, heat cure material. Eco Forma™ is mineral forward, waterborne air cure ceramic, built for a different kind of surface from the start.

Why Waterborne Matters in the Studio

Waterborne means water is the working carrier, not solvent based materials. In Eco Forma™, that is part of what makes the process cleaner, more studio safe, and easier to live with in the working s...

Seal + Finish: why air-cure surfaces unravel and what actually fixes it

Why the Surface Has to Be Built in Stages

If you’ve worked with air cure long enough, you’ve seen it: a piece can look finished, then shift in the next stage. The answer is not a heavier final coat. It is building the surface in stages so ...

What makes Eco Forma different

Eco Forma is not air-dry clay. It is air-cure ceramic, built to carry the surface through one connected workflow: Form → Dip → Image → Ceramic → Finish.